ESAB Ok Tubrod 15.11 1.2mm 16kg FCW

Product code: 34066063

In Stock Check Stock By Store
x
Inverness Depot3
An all-positional rutile cored wire with good toughness down to -60 °C for the use with M21 shielding gas. Diameters less than 1.4mm are all-positional except vertical down.

    This product is not available online.
    Please contact us to buy.

    • ESAB pioneered the development of gas-shielded flux-cored welding (FCAW) in 1957. Today, ESAB offers the broadest variety of mild steel and low alloy flux-cored wires available anywhere in the world.
    • ESAB cored wires offer flat welds with deep penetration and wetting into plate, with high deposition rates and efficiencies. This dramatically reduces weld time, increasing productivity.
    • Flux-cored welding can be up to three times more productive than Stick and up to 2.5 times more productive than MIG. FCAW also offers productive positional welding and low diffusible hydrogen levels (H5) when required.
    • ESAB Coreweld metal-cored wires were developed to meet the needs of demanding applications, such as structural steel construction, heavy equipment, transportation, bridges, petrochemical processing, offshore rigs, railcars, shipbuilding, pressure vessels, and general fabrication.
    • Utilizing advanced manufacturing processes and specially formulated composite fillers, Coreweld metal-cored wires combine high deposition rates and efficiencies, high travel speeds, excellent penetration, and ease of use. Metal-cored wires also provide excellent arc stability and outstanding penetration and wetting, with superior fusion at the root joint and sidewall. The result is a high-quality weld with minimal slag and spatter, and fewer residual silica islands.
    • Metal-cored wires offer several advantages over solid wire. Since metal-cored wires carry the current on the outer sheath, current densities are considerably higher than those found in wires sold, where the current is carried across the entire cross-sectional area. As a result, the metal-cored arc tends to be softer and can bridge gaps easier with reduced tendancy for burn through.

    ClassificationsSFA/AWS A5.29 : E81T1-Ni2M
    EN ISO 17632-A : T 50 6 2Ni P M21 2 H5
    ApprovalsCE : EN 13479
    DNV-GL : IV Y46MS H5 (M21)
    LR : 4Y46S H5 (M21)
    UKCA : EN 13479
    Welding CurrentDC+
    Diffusible Hydrogen< 5 ml/100g
    Alloy TypeLow alloy (2.5% Ni)
    Shielding GasM21 (EN ISO 14175)

    Customer reviews


    No customer reviews have been written for this product yet.

    Request Quotation

    Request Now
    X
    X