FS 461 C-EM 45.6cc Clearing Saw

Product code: 46101088

In Stock Check Stock By Store
x
Inverness Depot1

Was £1003.33 You save £154.33
Was £1204.00 You save £185.20
£1018.80 (£849.00 +VAT)
Delivery Truck Logo

£6.95

Or Free Collection From Store

Professional clearing saw for mowing tough areas of grass and brush OverviewTechnical dataFeaturesDocuments For working in challenging areas of tough grass. STIHL 4-point anti- vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, STIHL 2-MIX engine, STIHL M-Tronic. With ADVANCE Universal harness and AutoCut 46-2 mowing head.

    Quantity:

    CO² g/kWh865
    Capacity cm³45.6
    Performance kW2.2
    Performance PS3
    Weight kg8.7
    Sound pressure level with mowing head dB(A)101
    Vibration value, left with mowing head m/s²1.9
    Vibration value, right with metal tool m/s²2.3
    Vibration value, left with metal tool m/s²2.4
    Vibration value, right with mowing head m/s²2.7
    Sound pressure level with metal tool dB(A)101
    Total length cm179
    Tank volume l0.75
    Standard cutting toolAutoCut 46-2 mowing head
    • Large fuel tank
      The transparent fuel tank with a volume of 0.75 l ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening.

    • Air filter with long service life
      The easily accessible paper filter with a long service life means it can go for long intervals without changing.

    • Winter setting slide control
      It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing.

    • Manual fuel pump (Purger)
      A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

    • STIHL M-Tronic
      This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

    • STIHL ErgoStart
      STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

    • Reduced-emission engine technology
      2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

    • Bike handle
      When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

    • STIHL 4-point anti-vibration system
      In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide.

    • Compensator
      This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

    • Multi-function control handle
      Easy, comfortable thumb-operated control means the operator's hand never leaves the handle

    Customer reviews

    No customer reviews have been written for this product yet.

    Request Quotation

    Request Now
    X
    X