Stihl FS 56 C-E 27.2cc Brushcutter
Product code: 46100995
Was £345.00
You save £50.00
Was £414.00
You save £60.00
£354.00 (£295.00 +VAT)
£6.95
Or Free Collection From Store
New generation, light-weight petrol brushcutter with straight shaft, bike handle and ErgoStart. Modern appearance, convenient operation and very simple starting procedure are the highlights of the new generation STIHL grass trimmer range. The number of steps needed to start the machine has been drastically reduced. The frustration of a flooded engine is virtually eliminated. New 2-stroke engine with stratified charge allows fast acceleration, low emissions, reduced fuel consumption. Comes standard with fully adjustable bike handle and AutoCut line head.
Quantity:
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
For use with loop handle machines
| CO² g/kWh | 853 |
| Displacemet cm³ | 27.2 |
| Performance kW | 0.8 |
| Weight kg | 5.2 |
| Sound pressure level with metal tool dB(A) | 94 |
| Sound pressure level with plastic tool dB(A) | 93 |
| Sound power level dB(A) | 108 |
| Vibration value, left with plastic tool m/s² | 4.7 |
| Vibration value, right with metal tool m/s² | 5.5 |
| Vibration value, left with metal tool m/s² | 5.5 |
| Vibration value, right with plastic m/s² | 3.8 |
| Total length cm | 170 |
| Tank volume l | 0.34 |
| Standard cutting tool | AutoCut C 25-2 |
Similar Products
Request Quotation
Request Now